|
| |
LandSIM |
 |
Important Note: LandSIM does not reduce the cost of
your calls. The SIM Card must be valid and functioning with enough balance, call cost is equal to the rate specified by your
telecommunication
company, this system does not perform any illegal tasks, it will not
decode, open, or decrypt any encrypted code and it does not help in stealing lines at all.
Features:
-
Simple and uncomplicated system.
-
The user can send and receive calls by normal cell phone SIM card.
-
Displays caller's number.
-
Supports PBX systems.
Parts:
Make sure you have the following items in your package:
-
The LandSIM System.
-
Power supply cable.
-
GSM aerial.
-
Manual.
How to use:
-
Open the SIM card cover downside of the device.
-
Install your SIM card as you usually do with your cell phone.
-
Close the cover firmly.
-
Connect the aerial, If there is not signal, you can
put the aerial outside the window.
-
There is a magnet in the base of the aerial, fix the aerial on
a metallic surface or over the device.
-
Connect the power supply cable to 220 V – 50/60 HZ.
-
Press the red button in the backside of the system.
-
Wait for a period of 30 seconds before using the device.
-
To use a land phone, connect it to one of the ports in the
backside of the device, start using your phone as you do with any cell phone.
-
Don't forget you should have enough balance in your SIM card.
Troubleshooting:
-
No calls: make sure that the aerial is connected and fixed on a
metal surface, and that you can see good signal on any cell phone. If there was
no signal on a cell phone in that area, LandSIM will not work.
-
Signal is strong, but you can’t make calls: make sure that you have enough
balance in your SIM card, your calls are not
for free, this device doesn’t decrease the call cost. it makes it possible to
use your normal phones with GSM networks.
-
Signal is strong, but you don't receive any calls: make sure that the land phone is
connected properly, and that you hear the tone through the phone receiver..
-
No signal on the screen: make sure of connections,
aerial, power cable and
switch on the red button.
| |
|
